PRODUCT DESCRIPTION
Automatic Sliding Gate Opening System introduction:
The Automatic Sliding Gate Opening System is a mechanism designed to open and close sliding gates automatically. It is an efficient and convenient solution for residential and commercial properties that require controlled access.
When activated, the system uses an electric motor to move the gate along a track, allowing it to slide open smoothly. The motor is typically powered by electricity, but some systems may also have a backup battery option in case of power outages.
The opening process starts with a signal from a remote control, keypad, or sensor, which triggers the motor to start moving the gate. The gate slides open horizontally, providing a wide opening for vehicles or pedestrians to pass through.
The system is equipped with safety features to prevent accidents or damage. These can include obstacle detection sensors that stop the gate from closing if an object is detected in its path. Some systems may also have safety beams that create an invisible barrier, causing the gate to reverse if something interrupts the beam.
The Automatic Sliding Gate Opening System offers various customization options to suit different needs and preferences. It can be programmed to open to a specific width, allowing for partial openings if desired. The opening and closing speed can also be adjusted to ensure smooth operation.
Overall, the Automatic Sliding Gate Opening System provides a convenient and secure way to control access to properties. It offers ease of use, enhanced security, and can be integrated with other security systems for added functionality.
How the Automatic Sliding Gate Opener System Works?
The working principle of the automatic translation gate opener is to realize the translation opening and closing operation of the door through the electric drive device. The specific working process is as follows:
1.Controller control: The user sends instructions to the controller through wireless buttons or other control devices, and the controller performs corresponding processing after receiving the instructions.
2.Motor drive: The controller transmits instructions to the motor, and the motor starts working after receiving the instructions. The motor transmits power to the transmission mechanism through the rotating shaft.
3.The transmission mechanism rotates: The transmission mechanism starts to rotate after receiving the power from the motor, and transmits the power to the door body. The transmission mechanism usually uses gears, chains or belts to enable the door to be opened or closed in translation.
4.Door body translation: The door body begins to translate to open or close after receiving the power from the transmission mechanism. The door body usually consists of door panels, door frames and guide rails. Through the guidance and support of the guide rails, the door body can be opened and closed smoothly.
5.Safety protection: The automatic sliding gate hoist is equipped with multiple safety protection devices, such as safety sensing devices and automatic locking devices. The safety sensing device can detect obstacles around the door to avoid safety accidents such as pinches, collisions and illegal intrusions. The automatic locking device can automatically lock the door after it is closed, increasing the safety of the door.
TECHNICIAL SPECIFICATIONS
| Model | SL800AC | SL1000AC | SL1500AC | SL2000AC |
| Power supply | 220V/50Hz;110V/60Hz |
| Motor power | 370W | 400W | 550W | 750W |
| Gate moving speed | 11-13m/min |
| Maximum weight of gate | 800kg | 1000kg | 1500kg | 2000kg |
| Remote control distance | ≥30m |
| Remote control mode | Single button mode / Three button mode |
| Limit switch | Spring limit switch / Magnetic limit switch |
| Noise | ≤60dB |
| Working duty | S2, 20min |
| Recording of up remote controls | 25 |
| Frequency | 433.92 MHz |
| Working temperature | 20°C ~ +70°C |
| Package weight | 14kg | 15kg | 16kg | 17kg |
MAIN FEATURES
1. AC motor with built-in control unit
2. Keypad/single button interface
3. Alarm lamp, photo beam and safety beam interface
4. User can select auto-close function
5. Soft start and slow stop(smart version, optional)
6. Auto-reverse function when hitting obstacle during closing(smart version, optional)
7. Manual key release design for emergency power failure
8. Gear driven with built-in control board.
9. RF Hopping Code Technology prevents your remote code from being accessible to others.
10. In case of a power outage or an emergency you may also use manual release key.
11. The remote control has 4 buttons, corresponding to open/close/stop.
12. You can add up to 25 extra remotes that can control this system.
Installation
SL800AC/SL1000AC/SL1500AC/SL2000AC sliding gate opener is applicable to gate weight less
than 800kg/1000kg/1500kg/2000kg, and length of the sliding gate less than 12m. The drive mode
adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or
yard for protection.
Installation procedures
Preparation work before installation
Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate
can be manually moved smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate opener and protect the cables from damages,
please bury the motor & power cable and controlling cable separately with two PVC tubes.
Concrete pedestal
Please precast a concrete pedestal with the size can be 500mm x 300mm, depth be 250mm in
advance, so as to firmly install SL800AC/SL1000AC/SL1500AC/SL2000AC gate opener. Please
make sure the distance between the gate and gate opener is appropriate before
casting the pedestal.
Main engine installation
a) Dismantle the plastic housing on the main engine before installation and keep the relevant
fasteners properly;
b) Please prepare the power line for connecting the mounting plate to the main engine (the number
of power supply cable cores should not be less than 3 PCS, the sectional area of cable core should
be over 1.5mm² and the length should be determined by users according to the situation on
installation spot)
c) Please unlock the main engine before installation, the unlock method is: remove the rubber key
cover, insert the key, and open the manual release bar till it rotates by 90° as shown in Figure 5.
Then turn the output gear and the gear can be rotated easily;
FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER MANUAL.
SL800,1000,1500,2000AC User Manual.pdf
Product Tags:
|
|
400W Steel Gear Rack SL1000AC Sliding Door Operator for Automatic Gate Opening System Images
|
