SINGLE BI-DIRECTIONAL HIGH PEDESTRIAN TRAFFIC FLOW RELAY SIGNAL
OPTICAL SUBWAY ENTRANCE FLAP TURNSTILE
Luxury Intelligent flap gate ---can be compatible with IC card, ID
card, barcode card, fingerprint reading card recognition device
used for staff, provide civilized, orderly access methods;
effectively manage the access of staff. Can be widely used in the
station, wharf subway , factories, office building, hotel, clubs,
intelligent community, enterprises and institution that need
intelligent access management.
Features of Flap Barrier Gate
1.With fault self-test and alarm prompt function, convenient for
user maintenance and use.
2.Through the built-in small push-pull on the main control board,
device operating state can be programed.
3.The mechanical structure has anti-pinch and anti-collision
function. When the swing arm is blocked during the reset process,
the motor automatically stops working within the specified time.
Reset again after the default delay (until reset), and the force is
very small (≤ 2kg).
4. Illegal intrusion, trailing alarm, reverse intrusion gate
5.Anti-shock function, the arm is automatically locked when no open
signal is received.
6.Telescopic arms are adjustable synchronously (for double
7.With automatic reset function. After the switch is opened, the
system will automatically cancel the user's permission for the pass
when there is no pass within the specified time.The reset time is
adjustable from 1s to 60s (the system default time is 10s). After
the power is cut off, the channel is automatically opened (in
accordance with fire protection requirements), and the power-on
channel is automatically closed.
8.Infrared sensor reset, infrared sensor anti-trap function
(configure 5 pairs of infrared)
9.It can be connected with a variety of devices such as access
control systems, consumer systems, electronic ticket systems,
biometric systems, and electrostatic testers.
10.The one-way or two-way control personnel can enter and exit, and
the infrared sensing in and out channels.
11.Voice prompt function.
12.Remote control and management can be achieved directly through
the management computer.
|Working Voltage||AC220V±10V / AC110V±10V|
|Motor Type||DC brushless motor|
|Operating Temperature||-20 to 60°C|
|Humidity||<95%, without concretion|
|Passage Width||About 600mm|
|Communication Interface||RS485 (Distance: <=1200m)|
40 persons/min (normal open),
30 persons/min (normal close)
|Arm Open/Close Time||0.2s|